Eldes EKB3 Instalační manuál stáhnout pdf (Strana 101)

101

101EN

MANUAL ELDES ESIM264 V3.1

Set delay after last

communication

attempt

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → MS SETTINGS → OK → DELAY LAST ATTEMPT

→ OK → aaapp → OK

Value: aaaa – 4-digit administrator password; aaapp – duration of delay after last attempt,

range – [0... 65535] seconds.

EKB3

Enter parameter 69 & duration of delay after last attempt:

69 aaapp #

Value: aaapp – duration of delay after last attempt, range – [0... 65535] seconds.

Example: 69200#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

NOTE: 0 value disables delay after last communication attempt.

NOTE: The system is fully compatible with Kronos NET/Kronos LT monitoring station software for communication via GPRS network. When

using a dierent monitoring station software, EGR100 middleware is required. EGR100 is freeware and can be downloaded at www.eldes.lt/

en/download

30.2.1. GPRS Network

The system supports data transmission to the monitoring station via IP-based networks by GPRS network. The supported data formats are the

following:

• EGR100

• Kronos

To set up the system for data transmission via GPRS network, please follow the basic conguration steps:

1. Enable MS Mode parameter (see 30. MONITORING STATION).

2. Set 4-digit Account number (see 30. MONITORING STATION).

3. Set server IP address, which is a public IP address of the machine running EGR100 or, Kronos monitoring station soft ware.

4. Set server port, which is a port of the machine running EGR100 or Kronos monitoring station software.

5. Select TCP or UDP protocol. UDP is highly recommended for EGR100 data format.

6. Select data format: EGR100 ir Kronos.

7. In case EGR100 is selected, set 4-digit Unit ID number. Unit ID number can be identical to Account number.

8. Set up APN, user name and password provided by the GSM operator. De pending on the GSM operator, only APN might be required to set

up.

For detailed step-by-step instructions on how to establish the communication between ESIM264 alarm system and EGR100 middleware, please

refer to the middleware’s HELP le.

Set server IP address

SMS

SMS text message content:

ssss_SETGPRS:IP:add.add.add.add

Value: ssss – 4-digit SMS password; add.add.add.add – server IP address.

Example: 1111_SETGPRS:IP:65.82.119.5

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → GPRS SETTINGS → OK → SERVER IP → OK →

add.add.add.add → OK

Value: aaaa – 4-digit administartor password; add.add.add.add – server IP address.

EKB3

Enter parameter 40 & server IP address:

40 add add add add #

Value: add add add add – server IP address.

Example: 40065082119005#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 167 168

Komentáře k této Příručce

Žádné komentáře

Eldes EKB3 Instalační manuál Strana 101

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Eldes EKB3