Eldes EKB3 Instalační manuál stáhnout pdf (Strana 68)

68 EN

MANUAL ELDES ESIM264 V3.1

NOTE: Test Time aects the wireless device binding process due to the alarm system listening for the incoming data from the wireless

device. The system binds the wireless device only when the rst data packet is received.

An 8-digit wireless device ID code will be required in order to bind the device to the system or to remove it from the system. The wireless

ID code is printed on a label, which can be located on the inner or outer side of the enclosure or on the printed circuit board (PCB) of the

wireless device.

To bind a wireless device, please refer to the following conguration methods.

Bind wireless device

to the system

SMS

SMS text message content:

ssss_SET:wless-id

Value: ssss – 4-digit SMS password; wless-id – 8-digit wireless device ID code.

Example: 1111_SET:535185D

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

NOTE FOR EWK1/EWK2 USERS: When binding EWK1/EWK2 wireless keyfob, it is necessary to press several times any button/key on the

device.

Once a wireless device is bound, it occupies one of 32 available wireless device slots and the system adds one or two wireless zones and

wireless PGM outputs depending on the wireless device model.

To remove a wireless device, please refer to the following conguration methods.

Remove wireless

device from the

system

SMS

SMS text message content:

ssss_DEL:wless-id

Value: ssss – 4-digit SMS password; wless-id – 8-digit wireless device ID code.

Example: 1111_DEL:535185D

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

Once a wireless device is removed from the system, please restore its default parameters and remove the batteries from it.

To replace an existing wireless device with a new same model device, please refer to the following conguration methods

Replace wireless

device

SMS

SMS text message content:

ssss_REP:wless-id<oldwl-id

Value: ssss – 4-digit SMS password; wless-id – 8-digit wireless device ID code of the old devi-

ce; oldwl-id - 8-digit wireless device ID code of the new device.

Example: 1111_REP:535185D<41286652

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

When a wireless device is successfully replaced with a new one, the conguration of the old wireless device remains.

NOTE: If you are unable to bind a wireless device, please restore the wireless device’s parameters to default and try again. For more details

on how to restore the default parameters, please refer to the user manual provided along with the wireless device or visit www.eldes.lt/en/

download to download the latest user manual

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 167 168

Komentáře k této Příručce

Žádné komentáře

Eldes EKB3 Instalační manuál Strana 68

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Eldes EKB3