Eldes EKB3 Instalační manuál stáhnout pdf (Strana 111)

111

111EN

MANUAL ELDES ESIM264 V3.1

VIN

AUX- AUX+

EKB2

ESIM264

COM

5,6kΩ

31.1.1.3. Visual and Audio Indications

EKB2 can be used even in dark premises as the LCD screen and keys are illuminated continuously. The illumination level lowers down if 3 min-

utes after the last key-touch expires while the system is disarmed. In case of alarm, the keypad illumination level is boosted and stays in this

state until the system is disarmed.

The built-in buzzer uses two types of sound signals – three short beeps and one long beep. Three short beeps stand for successfully carried

out conguration, one long beep – for invalid conguration. In addition, the buzzer emits short beeps in case of alarm and exit/entry delay

countdown.

31.1.1.4. EKB2 Zone and Tamper

Keypad EKB2 has one wired zone Z1 and one tamper button. By default, the keypad zone Z1 is disabled. The keypad zone can be enabled by

SMS, EKB2 keypad, EKB3 keypad and ELDES Conguration Tool software (see 14.9. Disabling and Enabling Zones). When Z1 is enabled,

it operates like any other system zone, therefore a sensor can be connected to it. In addition, Z1 and COM terminals must be connected with

resistor of 5,6k nominal.

The tamper button is intended for monitoring the enclosure status of EKB2, therefore the system causes alarm if the enclosure is illegally

opened. Keypad zone Z1 must be enabled and resistor connected even if the tamper button alone is required.

31.1.1.5. Icons and Messages

Icon / Message Description

Chime - Delay zone violated when system

is disarmed.

Exit delay countdown initiated.

System is armed and menu is locked.

System is disarmed and menu is unlocked

+ CONFIGURATION

MODE

Conguration mode activated.

BURGLARY ALARM

Delay, Instant or Follow zone violated

when system is armed.

Icon / Message Description

24 ALARM

24H zone violated.

FIRE ALARM

Fire zone violated.

TAMPER ALARM

Tamper violated

READY

System is ready to be armed.

NOT READY

System is not ready to be armed – one or

more zones / tampers violated.

ARMED

System is armed (optional feature).

STAY

Stay mode activated

BYP

System armed in Stay mode

TBL

One or more system faults are present

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 167 168

Komentáře k této Příručce

Žádné komentáře

Eldes EKB3 Instalační manuál Strana 111

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Eldes EKB3