Eldes EKB3 Instalační manuál stáhnout pdf (Strana 26)

26 EN

MANUAL ELDES ESIM264 V3.1

The following table provides a list of EKB3 indications, which are relevant during Conguration mode.

Indication Description

Indicator ARMED ashing Conguration mode activated successfully.

Indicator SYSTEM ashing Valid parameter is entered and waiting for valid value to be enetered.

1 long beep Non-existing command or invalid parameter value entered.

3 short beeps Command entered successfully.

NOTE: The system can be congured using only one keypad at a time. Other connected keypads will be inactive while the Congura-

tion mode is activated.

NOTE: Conguration mode will automatically deactivate if 1 minute after the last key-stroke expires.

Cong

Tool

Software ELDES Conguration Tool is intended for ESIM264 alarm system conguration via USB port locally or via GPRS con-

nection remotely. This software simplies system conguration process by allowing to use a personal computer in the process.

Before starting to use ELDES Conguration Tool software, please read the user guide provided in the software’s HELP section.

ELDES Conguration Tool is freeware and can be downloaded from at: www.eldes.lt

Remote System Conguration via GPRS Connection

ATTENTION: The system will NOT send any data to monitoring station while conguring the system remotely via GPRS network. However,

during the conguration session, the data messages are queued up and transmitted to the monitoring station after the conguration

session is over.

ATTENTION: When the Conguration mode is activated by EKB3 keypad or menu section CONFIGURATION is opened by EKB2 keypad,

remote system conguration will be disabled.

NOTE: The keypads will be inactive when the system is being congured remotely.

Before conguring ESIM264 remotely via GPRS connection, make sure that:

• SIM card is inserted into SIM CARD1 slot of ESIM264 device (see 2.2. Main Unit, LED & Connector Functionality).

• Mobile internet service (GPRS) is enabled on the SIM card.

• Power supply is connected to ESIM264.

• Default SMS password is changed to a new 4-digit password (see 6. PASSWORDS).

• At least User 1 phone number is set up (see 8. USER PHONE NUMBERS).

• APN, user name and password are set up (see 30.2.1. GPRS Network).

Establishing Remote Connection Between ESIM264 System and Conguration Server

Initiate the

connection

to ELDES server

In order to activate a remote GPRS connection between ESIM264 system and ELDES conguration

server please , send the following SMS text message from user phone number.

Upon the successful SMS text message delivery, the system establishes a connection session for

20 minutes. An SMS reply, containing device IMEI number and conrming a successful connection

establishment, is sent shortly.

SMS

SMS text message content:

ssss_STCONFIG

Value: ssss – 4-digit new SMS password.

Example: 1111_STCONFIG

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 167 168

Komentáře k této Příručce

Žádné komentáře

Eldes EKB3 Instalační manuál Strana 26

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Eldes EKB3