Eldes EKB3 Instalační manuál stáhnout pdf (Strana 44)

44 EN

MANUAL ELDES ESIM264 V3.1

12.8. Disabling and Enabling Arm/Disarm Notications

By default, when the system is successfully armed or disarmed, it replies with conrmation by SMS text message to:

• user phone number, sharing the same partition as EKB2/EKB3 keypad and user password, iButton key, EWK1/EWK2 wireless keyfob or

zone, set up for Arm/Disarm by Zone method.

• user phone number that the system arming/disarming by free of charge phone call was initiated from.

• user phone number that the system arming/disarming by SMS text message was initiated from.

The conrmation SMS text message is sent to the user phone number regarding each partition separately and contains system status and

partition name.

To disable/enable this notication for individual user phone number, please refer to the following conguration methods.

Disable arm/disarm

notication for

individual user phone

number

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → CALL/SMS

SETTINGS → OK → USERS → OK → USER 1... 5 → OK → SEND ARM/DARM SMS → OK →

DISABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 75, user phone number slot & parameter status value:

75 us 0 #

Value: us – user phone number slot, range – [01... 05].

Example: 75030#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

Enable arm/disarm

notication for

individual user phone

number

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → CALL/SMS

SETTINGS → OK → USERS → OK → USER 1... 5 → OK → SEND ARM/DARM SMS → OK →

ENABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 75, user phone number slot & parameter status value:

75 us 1 #

Value: us – user phone number slot, range – [01... 05].

Example: 75041#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

By default, the system sends SMS text message only to the rst available user phone number when the system is successfully armed/

disarmed. If the system did not receive the SMS delivery report during 20 seconds, it will attempt to send the SMS text message to the next

preset user phone number. To ignore the SMS delivery report and allow/disallow the system to send the SMS text message to every preset

user phone number, please refer to the following conguration methods.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 167 168

Komentáře k této Příručce

Žádné komentáře

Eldes EKB3 Instalační manuál Strana 44

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Eldes EKB3