Eldes EKB3 Instalační manuál stáhnout pdf (Strana 116)

116

116 EN

MANUAL ELDES ESIM264 V3.1

31.1.2. EKB3 - LED Keypad

EKB3 is a LED keypad intended for using with ESIM264 alarm system.

Main EKB3 features:

• Alarm system arming and disarming (see 12.4. EKB3 Keypad and User Password).

• Arming and disarming in Stay mode (see 15. STAY MODE).

• System parameter conguration (see 5. CONFIGURATION METHODS).

• PGM output control (see 18.4. Turning PGM Outputs ON and OFF).

• Visual indication by LED indicators (see 31.1.2.3. Visual and Audio Indications).

• Audio indication by built-in buzzer (see 31.1.2.3. Visual and Audio Indications).

• Keypad partition switch (see 23.3. Keypad Partition and Keypad Partition Switch).

The system conguration by EKB3 keypad is performed by activating the Conguration mode (see 5. CONFIGURATION METHODS) and en-

tering the required parameters & values. ESIM264 system allows to connect up to 4 EKB3 keypads.

31.1.2.1. Technical Specications

31.1.2.1.1 Electrical & Mechanical Characteristics

Power Supply 12-14V 150mA max

Maximum Keypad Connection Cable Length 100 m.

Dimensions 140x100x18mm

Humidity

0-90% RH @ 0... +40 °C (non-condensing)

Range of Operating Temperatures -30...+55ºC

31.1.2.1.2 LED Functionality

ARMED Steady ON - alarm system is armed / exit delay in progress; ashing - Conguration mode activated

READY Steady ON - system is ready – no violated zones and tampers

SYSTEM Steady ON - system faults; ashing - violated high-numbered zone (Z13-Z44)

BYPS Steady ON - zone bypass mode

1-12 Steady ON - violated zone Z1... Z12

31.1.2.1.3 Keys Functionality

[BYPS] Zone bypass mode

[CODE] System fault list / violated high-numbered zone indication / violated tamper indication

[*] 1st character for Conguration mode activation/deactivation command / clear typed in characters / keypad partition swi-

tch (if enabled)

[#] Conrm (enter) command

[0] ... [9] Command typing

[STAY] Manual system arming in Stay mode

[INST] N/A

31.1.2.1.4 Connector Functionality

AUX+ Positive power supply terminal

AUX- Negative power supply terminal

G RS485 interface for communication (green wire)

Y RS485 interface for communication (yellow wire)

COM Common terminal for Z1

Z1 Security zone terminal

Z2 N/A

3, 2 Keypad address pins

1 N/A

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 167 168

Komentáře k této Příručce

Žádné komentáře

Eldes EKB3 Instalační manuál Strana 116

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Eldes EKB3