Eldes EKB3 Instalační manuál stáhnout pdf (Strana 92)

92 EN

MANUAL ELDES ESIM264 V3.1

EKB3

Yellow LED SYSTEM indicates system faults. SYSTEM LED indications are mentioned in the table below.

SYSTEM LED Description

Steady ON One or more tampers are violated; other system faults (see below)

Flashing One or more high-numbered zones are violated

In order to nd out more on the particular system fault, please enter command A provided below. After this procedure the system

will activate red zone LEDs for 15 seconds. The description on each LED indication is mentioned in the table below.

Zone LED Description

1 One or more tampers are violated

2 Backup battery requires replacement - backup battery resistance is 2 or higher

3 Mains power supply is lost

4 Date/time not set.

5 One or more high-numbered zones (Z13-Z44) are violated

6 GSM connection is lost

In order to nd out which particular high-numbered zone is violated please , enter command B.

In order to nd out which particular tamper is violated please , enter command C.

A. System fault indication - enter command:

[CODE#]

B. Violated high-numbered zone indication – enter command:

[CODE1]

C. Violated tamper indication – enter command:

[CODE2]

The number of violated high-numbered zone or tamper can be calculated using the table below according to the formula: number

from zone LED section B + number from zone LED section A.

Example: LED #3 from section A is ashing and LED #8 from section B is illuminated continuously. According to the table below

LED #8 is equal to number 18, therefore 18 + 3 = 21.

Result: Violated high-numbered zone or tamper number is 21.

Zone LED section - A (ashing) Zone LED section - B (steady ON)

Zone LED 1 = 1 Zone LED 7 = 12

Zone LED 2 = 2 Zone LED 8 = 18

Zone LED 3 = 3 Zone LED 9 = 24

Zone LED 4 = 4 Zone LED 10 = 30

Zone LED 5 = 5 Zone LED 11 = 36

Zone LED 6 = 6 Zone LED 12 = 42

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 167 168

Žádné komentáře

Eldes EKB3 Instalační manuál Strana 92