Eldes EKB3 Instalační manuál stáhnout pdf (Strana 106)

106

106 EN

MANUAL ELDES ESIM264 V3.1

Due to the individual conguration of each monitoring station, the system may fail to deliver the data message via Voice Calls communi-

cation method. In such cases it is recommended to adjust the microphone gain until the optimal value, leading to successful data message

delivery, is discovered.

Set microphone gain

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETT INGS → OK → GSM AUDIO → OK

→ MICROPHONE GAIN → OK → mg → OK

Value: aaaa – 4-digit administrator password; mg – microphone gain, range – [0... 15].

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

30.2.3. CSD

The system supports up to 5 monitoring station phone numbers for communication with the alarm system by CSD communication method.

Tel. Number 1 is mandatory, the other four can be used as backup phone numbers and are not necessary. The supported phone number

format is the following:

• International (w/o plus) – The phone numbers must be entered starting with an international country code in the following format:

[international code][area code][local number], example for UK: 4417091111111.

To set up the system for data transmission via CSD, please follow the basic conguration steps:

1. Enable MS Mode parameter (see 30. MONITORING STATION).

2. Set 4-digit Account number (see 30. MONITORING STATION).

3. Set Tel. Number 1... 5.

Set monitoring station

phone number

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → MS SETTINGS → OK → CSD SETTINGS → OK →

TEL. NUMBER 1... 5 → OK → ttteeellnnuumm → OK

Value: aaaa – 4-digit administrator password; ttteeellnnuumm – up to 15 digits monitoring

station phone number.

EKB3

Enter parameter 85, number of entry & phone number:

85 ps ttteeellnnuumm #

Value: ps – phone number slot, range – [01... 05]; ttteeellnnuumm – up to 15 digits monito-

ring station phone number.

Example: 85014417091111111#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

Delete monitoring

station phone number

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → MS SETTINGS → OK → CSD SETTINGS → OK →

TEL. NUMBER 1... 5 → OK → OK

Value: aaaa – 4-digit administrator password.

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 167 168

Komentáře k této Příručce

Žádné komentáře

Eldes EKB3 Instalační manuál Strana 106

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Eldes EKB3